Ametek Western Research IPS-4, User Manual

Page: 128 / 238

4-36 | IPS-4 Dual Bench (UV / IR) Analyzer
Change Password
Use this function to enter a password for the first time after installing
the analyzer or whenever you are changing the password. The pass-
word entered here is the password that must be entered in the Enter
Password function that will allow you to change the analyzer configu-
ration settings.
Because the analyzer is shipped from the factory without a password,
you must enter a password in the Change Password function before
you can change parameter settings. If you attempt to change the
password without first entering the password, the message “ System
Locked ” appears.
Keys that can be used to enter a password include any of the numeric
keys ( 0–9 ), decimal key ( . ), and the minus ( – ) key. A maximum of
nine characters can be used for the password.
Lock
Use this functions to clear the password from memory and “lock” all
parameters, settings, and functions as read-only. When you select
Lock and press
ENTER
, the parameters are locked out and the message
“ System locked ” is displayed. When the system is locked, a padlock
icon ( ) appears in the top-right corner of the HOME screen.