Ametek CEM/Humox, User Manual

Page: 25 / 136

Installation
|
3-5
Control Unit Mounting
The Series 2000 Control Unit comes with different packaging options:
• The weatherproof enclosure can be mounted to either a panel, a wall, or to a
pole.
• The general purpose enclosure can be mounted as a panel, a rack, or a wall
mount.
Find the section that corresponds to the type of control unit mounting configuration
you ordered, then mount as shown in that section.
Weatherproof - Panel
Figure 3-3 shows the panel mounting di-
mensions for the Series 2000 weatherproof
enclosure. Use 1/4” diameter fasteners to
mount the control unit to the panel.
Weatherproof - Wall/Pole
Figure 3-4 shows the wall and pole mount -
ing dimensions for the Series 2000 weath-
erproof enclosure. For wall mount installa-
tions, use 1/4” diameter fasteners to mount
the control unit to a wall. For pole mount
installations, the two slots on the backplate
of the enclosure can be used to accommo-
date a customer supplied U-bolt of 3/8” or
1/2” diameter for a 2 1/2” to 4 1/2” pole
diameter.
Figure 3-3.
Series 2000, weatherproof panel mount.
Figure 3-4.
Series 2000, weatherproof wall/pole mount.