Ametek CEM/Humox, User Manual

Page: 60 / 136

4-16 | Thermox CEM/Humox Analyzer
Analog Range Key
The Series 2000 control unit allows you to direct process readings to either of the
two analog output ports on the rear of the control unit. Analog output parameters
are defined using the Analog Range Key menu.
See the “Select an Analog Output Port” section in this chapter for help on how to
select an analog output port. All functions in this chapter are directed to a specific
analog output port. See the “Enter a Password” section for help on how to enter a
system password so you can then access Analog Range key functions. Information
on how to define or disable passwords is discussed in the Setup Key section.
The remainder of this chapter provides help on how to do the following:

Define what information should be sent to the analog output port during a
calibration. Decide whether to hold the output at the last process reading taken
before the start of calibration or track the calibration readings (Set Track/Hold).
Figure 4-4.
Analog Range
Key menu.
Analog Range
Key
Set Current Range
Set Track/Hold
Set Current Mode
Select Function
Output Filtering