Ametek CEM/Humox, User Manual

Page: 128 / 136

B-2 | Thermox CEM/Humox Analyzer
Figure B-3.
Alarm Key
menu options.
ALARM NUMBER
FUNCTION
*Select Function Alarm Configure Relay Configure
Alarm 3 Sensor readings
Cal. Start
High sensor alarm
Low sensor alarm
(only selectable if Se-
lect Function is other
than calibrate or verify
start)
Energize on alarm
De-energize on alarm
Alarm 4 % Moisture
% O2 Wet
% O2 Dry
High sensor alarm
Low sensor alarm
Alarm 5 % Moisture
% O2 Wet
% O2 Dry
High sensor alarm
Low sensor alarm
Alarm 6 % Moisture
% O2 Wet
% O2 Dry
High sensor alarm
Low sensor alarm
* Note: Alarms 1 and 2 are reserved for the watchdog timer and service alarms and are
not software-selectable.
ANALOG KEY
MENU OPTIONS
FUNCTIONS/OPTIONS
Set Current Range Range of readings that the analog output represents (for
example:
4% O
2
= 4 mA
4% O
2
= 20 mA)
Set Track/Hold Hold output at last process reading during a cal or verify
Set Current Mode 0 to 20 mA
4 to 20 mA
Output Filtering Smooth out variations in readings
Select Function % Moisture
% O
2
(wet or dry)
Cell temperature (wet or dry)
Cell Millivolts (wet or dry)
Thermocouple Millivolts (wet or dry)
Figure B-2.
Analog Range
menu options.