manualshive.com logo in svg

American Dynamics AD615, Operator'S Manual

Share
Download
American Dynamics AD615 Operator'S Manual Download Page 74

Glossary

G-3

White balance

Adjustments in the color hue (red and blue) gains for a camera so that true white appears
white in the image. It is normally compensated for by the automatic gain control. In some
lighting conditions, you may need to manually adjust the red and blue settings for optimal
viewing. When Automatic White Balance is enabled, the camera measures the image and
automatically adjusts the red and blue settings to balance white.  When Automatic White
Balance is disabled, the camera uses the values set for the red and blue settings to balance
white.

Zoom

To adjust the magnification of the camera lens to make an object appear closer (larger) or
farther away (smaller).

Zoom stop factors

Defines how to partition the zoom function. The first zoom stop setting may be 16X or 24X.
The maximum zoom stop setting may be 32X, 48X, 64X, 80X, 96X, 112X or 128X.

Summary of Contents for AD615

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands