Language and Password Settings
6-5
3.
Use the
Pan / Tilt
control to move the blinking highlight around the available characters.
When the correct character is highlighted, press
Focus Far
.
If you make a mistake, press
Zoom In
to move the cursor one space right or
Zoom Out
to
move the cursor one space left.
4.
Repeat step 3 until the password is complete. When finished, move the highlight to
Continue
, then press
Focus Far
.
5.
You must successfully enter the password twice. Use the procedure in step 3 to enter the
password again. When finished, move the highlight to
Continue
, then press
Focus Far
.
Note
: If the passwords do not match, you must start over. Return to step 3 and repeat the
procedure.
6.
The
Language/Password
screen appears. Do one of the following:
•
To enable the password, continue with
Enabling or Disabling Password
Protection
on page 6-5.
•
If you want to change the language setting, refer to
Selecting a Language
on
page 6-2.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
2
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to
Exit
, then press
Focus Far
. The
Dome Configuration Menu
appears. Continue with
What To Do Next
on page 6-6.
Enabling or Disabling Password Protection
Password protection must be enabled before passwords can be used.
1.
Select
Language/Password
from the
Dome Configuration Menu
.
2.
Use the
Tilt
control to move the highlight bar to
Password Protection
.
3.
Press
Zoom In
or
Zoom Out
to change the setting.
•
If you want to use a password to prevent unauthorized use of the dome
configuration utility, select
On
.
•
If you do not want to use a password, select
Off
.
The default setting is
Off
.
4.
Do one of the following:
•
If you want to change the language setting, refer to
Selecting a Language
on
page 6-2.
•
If you want to set or change the password, refer to
Setting or Changing the Dome
Password
on page 6-4.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
3
2
This command is not supported with Manchester.
3
This command is not supported with Manchester.
Summary of Contents for AD615
