American Dynamics AD615, Operator'S Manual

Page: 55 / 80

5-12 Operator’s Manual
7. Do one of the following:
•
If you want to change the status information displayed, refer to Displaying or
Hiding Status Information on page 5-2.
•
If you want to change the name information displayed, refer to Displaying or
Hiding Name Information on page 5-3.
•
If you want diagnostic information to appear when the dome resets, refer to
Displaying Diagnostic Tests During Reset on page 5-6.
•
If you want to assign names to the dome, areas, presets, patterns, or alarms, refer
to
Assigning or Changing Name Information on page 5-7.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
6
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to Exit , then press
Focus Far
. The Dome Configuration Menu
appears. Continue with What To Do Next on page 5-12.
What To Do Next
When you select Exit from the On-Screen Text Display screen, the Dome
Configuration Menu appears.
DOME CONFIGURATION MENU
PAN/TILT/ZOOM OPTIONS
CAMERA / LENS FUNCTIONS
ALARMS / AREAS / HOME
ON-SCREEN TEXT DISPLAY
LANGUAGE / PASSWORD
EXIT AND SAVE CHANGES
QUIT WITHOUT SAVING
RESET TO FACTORY SETTINGS
Figure 5-9: Dome Configuration Menu
From this screen you can:
•
Select an option to make additional changes. These topics are covered in
chapters 2 through 6.
•
Save the changes you made and exit the utility. This topic is covered in
Chapter 1.
•
Exit the utility without saving changes. This topic is covered in Chapter 1.
•
Restore all settings to the factory defaults. This topic is covered in Chapter 1.
Use the
Tilt
control to move the highlight bar to selection you want to use, then press
Focus
Far
to continue. Refer to the related chapter for additional information.
6
This command is not supported with Manchester.
Covered in Chapter 2
Covered in Chapter 3
Covered in Chapter 4
Covered in Chapter 5
Covered in Chapter 6
Covered in Chapter 1