Pan, Tilt, and Zoom Options
2-3
2.
Press
Zoom Out
or
Zoom In
to toggle the setting.
•
If you want the flip feature enabled, select
On
.
•
If you want the flip feature disabled, select
Off
.
The default setting is
Off
.
3.
Do one of the following:
•
If you want to make changes to the zoom stop settings, continue with
Setting the
Zoom Stop Factors
on page 2-3.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
1
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to
Exit
, then press
Focus Far
. The
Dome Configuration Menu
appears. Continue with
What To Do Next
on page 2-5.
Setting the Zoom Stop Factors
Zoom stop factors
define how to partition the zoom function.
For example, you set the first zoom stop to 16X and the maximum zoom stop to 112X. If the
current zoom factor is less than 16X, pressing
Zoom In
continuously causes the zoom to stop
at 16X. If the current zoom factor is 16X (or greater), pressing
Zoom In
continuously causes
the zoom to stop at 112X. The second zoom stop will be in effect until the zoom factor is
reduced to less than the first stop zoom factor (16X)
and
the zoom button is released for one
second or longer.
The margin of error for the zoom stop factor is
±
2X for the dome.
Setting the First Zoom Stop
1.
Select
Pan/Tilt/Zoom Options
from the
Dome Configuration Menu
.
2.
Use the
Tilt
control to move the highlight bar to the
1st Zoom Stop X
setting.
3.
Press
Zoom Out
or
Zoom In
to change the setting.
•
If you want the first zoom stop to be 16X magnification, select
16
.
•
If you want the first zoom stop to be 24X magnification, select
24
.
The default setting is
24X
.
4.
Do one of the following:
•
If you want to change the maximum zoom setting, continue with
Changing the
Maximum Zoom Setting
on page 2-4.
•
If you want to make changes to the flip setting, refer to
Setting the Automatic
“Flip”
Feature on page 2-2.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
2
1
This command is not supported with Manchester.
Summary of Contents for AD615
