4-8
Operator’s Manual
•
If you want the home position to be a preset, select
Preset
, then continue with
step 4.
•
If you want the home position to be a pattern, select
Pattern
, then continue with
step 4.
•
If you do not want to set a home position, select
No Action
, then continue with
step 6.
The default setting is
No Action
.
4.
Use
Pan Right
to move the highlight bar to the
Number
field, then press
Zoom In
or
Zoom
Out
to change the setting.
•
If the home position is a preset, select the number from 1
through
96 (1 through
64 for Manchester domes) for the preset you want to assign.
If the preset has
not
been programmed, preset programming automatically starts.
Refer to
Programming Presets
on page
4-11.
If the preset has been programmed, continue with step 5.
•
If the home position is a pattern, the select the number from 1 through 3 for the
pattern you want to assign. Continue with step 5.
5.
Use the
Tilt
control to move the highlight bar to
Return Time Mins
. Press
Zoom Out
or
Zoom In
to set the amount of time that the dome must remain inactive before returning to
the home position.
The range for the setting is
1
to
60
minutes.
The default setting is
10
minutes.
6.
Use the
Tilt
control to move the highlight bar to
Exit
. Press
Focus Far
to return to the
Alarms/Areas/Home
screen. Continue with step 7.
7.
When the
Alarms/Areas/Home
screen appears, do one of the following:
•
If you want to configure the alarm actions, continue with
Configuring Alarm
Actions
on page 4-2.
•
If you want to configure the input states, continue with
Configuring Normal
Input States
on page 4-5.
•
If you want to define areas, continue with
Programming Area Boundaries
on
page 4-9.
•
If you want to define presets, continue with
Programming Presets
on page 4-11.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
4
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to
Exit
, then press
Focus Far
. The
Dome Configuration Menu
appears. Continue with
What To Do Next
on page 4-14.
4
This command is not supported with Manchester.
Summary of Contents for AD615
