4-4
Operator’s Manual
The highlight bar appears on the
Set Alarm Actions
option. Press
Focus Far
to select.
2.
Use the
Tilt
control to move the highlight bar to the appropriate alarm input.
3.
Press
Zoom In
or
Zoom Out
to change the setting.
•
If you want the action to be a preset, choose
Preset
then continue with step 4.
•
If you want the action to be a pattern, choose
Pattern
then continue with step 4.
•
If you do not want a special action for this input, choose
No Action
then
continue with step 5.
The default setting is
No Action
.
4.
Use
Pan Right
to move the highlight bar to the
Action Number
field, then press
Zoom In
or
Zoom Out
to change the setting.
•
If the alarm action is a preset, select the number (1 through 96) for the preset you
want to assign.
If the preset has not been programmed, preset programming automatically starts.
Refer to
Programming Presets
on page 4-11.
If the preset has been programmed, continue with step 5.
•
If the alarm action is a pattern, then select the number (1 through 3) for the
pattern you want to assign. Then continue with step 5.
5.
If you need to make additional changes to the alarm actions for this dome repeat steps 3
through 5. When finished, continue with step 6.
6.
Use the
Tilt
control to move the highlight bar to
Send Inputs to Host
?
7.
Press
Zoom In
or
Zoom Out
to change the setting.
•
If you want changes in the input states to be forwarded to the host controller,
choose
Yes
.
1
Continue with step 8.
•
If you do not want changes in the input states to be forwarded to the host
controller, choose
No
. Continue with step 8.
The default setting is
Yes
.
8.
Use the
Tilt
control to move the highlight bar to
Exit.
Press
Focus Far
to return to the
Alarm/Areas/Home
screen, then continue with step 9.
9.
When the
Alarm/Areas/Home
screen appears, do one of the following:
•
If you want to configure the input states, continue with
Configuring Normal
Input States
on page 4-5.
•
If you want to set the “home” position, continue with
Assigning the Dome’s
Home Position
on page 4-7.
•
If you want to define areas, continue with
Programming Area Boundaries
on
page 4-9.
•
If you want to define presets, continue with
Programming Presets
on page 4-11.
1
This setting does not apply to Manchester.
Summary of Contents for AD615
