American Dynamics AD615, Operator'S Manual

Page: 27 / 80

3-6 Operator’s Manual
Setting the Automatic White Balance Feature
1. Select Camera / Lens Functions from the Dome Configuration Menu .
2. Use the Tilt control to move the highlight bar to the Auto White Bal setting.
3. Press
Zoom Out
or
Zoom In
to change the setting.
•
If you want the white balance to be automatic, select On .
•
If you want manually adjust the red or blue settings, select Off . Then continue
with Changing the Red and Blue Settings on page 3-6.
The default setting is On .
4. Do one of the following:
•
If you want to make changes to the line lock setting, refer to Setting Line Lock on
page 3-2.
•
If you want to make changes to the automatic gain control settings, refer to
Automatic Gain Control Settings on page 3-3.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
4
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to Exit , then press
Focus Far
. The Dome Configuration Menu
appears. Continue with What To Do Next on page 3-8.
Changing the Red and Blue Settings
Note Auto White Bal must be set to Off to make changes to this setting.
1. Select Camera / Lens Functions from the Dome Configuration Menu .
2. If you want to make changes to the red setting, use the Tilt control to move the highlight
bar to Red White Bal , then continue with step 3.
If you want to make changes to the blue setting, continue with step 4.
3. Press
Zoom In
or
Zoom Out
to adjust the setting. The values range from 128 to 1023.
•
Press
Zoom In
to increase the value of the setting.
•
Press
Zoom Out
to decrease value of the setting.
There is no default value for the red setting.
4. Do one of the following:
•
If you want to make changes to the blue setting, use the
Tilt
control to move the
highlight bar to
Blue White Bal
, then continue with step 5.
4
This command is not supported with Manchester.