American Dynamics AD615, Operator'S Manual

Page: 15 / 80

1-6 Operator's Manual
Where To Go Next
Now that you understand how to start and work with the configuration utility, you are ready
to begin changing the settings for your dome. Use the following chart to determine which
chapters you should use next.
Chapter Topics Covered
Chapter 2: Pan, Tilt, and
Zoom Options
•
Set the “flip” feature (rotates dome 180
°
)
•
Set first zoom stop (16X or 24X) and
maximum zoom stop (up to 128X)
Chapter 3: Camera and Lens
Functions
•
Set line lock (prevents vertical rolling when
camera is switched)
•
Enable automatic or manual gain settings
•
Enable automatic or manual white balance
settings (red and blue values)
Chapter 4: Alarms, Areas, and
Home Settings
•
Set alarm actions (preset, pattern, or no
action)
•
Configure normal input states for alarms
(open or closed)
•
Send input states to host controller
•
Set “home” position for dome
•
Program area boundaries
•
Program presets
Chapter 5: On-Screen Text
Display Settings
•
Display or hide dome status information
•
Display or hide camera, preset, pattern, area
or alarm name information
•
Display diagnostic information or firmware
version information during dome reset
•
Assign names to camera, presets, patterns,
areas, and alarms
•
Reset all names to factory defaults
•
Set text attributes (outline and translucent
characters)
Chapter 6: Language and
Password Settings
•
Choose the language for the menus and
prompts
•
Set password
•
Enable or disable password feature
Keeping Records
Appendix A, Records , summarizes the default values for each configuration setting. In
addition, it provides space for writing information about the settings you change. Be sure to
keep records for each DeltaDome surveillance camera
installed at your facility.