3-4
Operator’s Manual
Setting the AGC Mode
1.
Select
Camera / Lens Functions
from the
Dome Configuration Menu
.
2.
Use the
Tilt
control to move the highlight bar to the
AGC Mode
setting.
3.
Press
Zoom Out
or
Zoom In
to change the setting.
•
If you want the AGC to be automatic, select
On
.
•
If you want the AGC to be manual, select
Off
. Then continue with
Changing the
AGC Manual Gain Setting
on page 3-4.
The default setting is
On
.
4.
Do one of the following:
•
If you want to make changes to the line lock setting, refer to
Setting Line Lock
on
page 3-2.
•
If you want to make changes to the white balance settings, refer to
Adjusting
White Balance
on page 3-5.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
2
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to
Exit
, then press
Focus Far
. The
Dome Configuration Menu
appears. Continue with
What To Do Next
on page 3-8.
Changing the AGC Manual Gain Setting
Note
AGC Mode
must be set to
Off
to make changes to this setting.
1.
Select
Camera / Lens Functions
from the
Dome Configuration Menu
.
2.
Use the
Tilt
control to move the highlight bar to the
AGC Gain
setting.
3.
Press
Zoom Out
to decrease value of the setting.
Press
Zoom In
to increase the value of the setting.
The values for the setting range from 0 to 1128.
4.
Do one of the following:
•
If you want to make changes to the line lock setting, refer to
Setting Line Lock
on
page 3-2.
•
If you need to make adjustments in the white balance, refer to
Adjusting White
Balance
on page 3-5.
2
This command is not supported with Manchester.
Summary of Contents for AD615
