5-6
Operator’s Manual
7.
The following prompt appears on the screen:
RESET PROGRAMMABLE NAMES NO
Press
Zoom In
or
Zoom Out
to toggle the setting.
•
To reset all names to the default value, select
Yes
, then press
Focus Far
. The
Name Configuration Menu
displays. “
Programmable Names Have Been
Reset
” appears at the bottom of the screen.
•
To cancel resetting of names, select
No
, then press
Focus Far
. The
Name
Configuration Menu
displays.
The default selection is
No
.
8.
Do one of the following:
•
If you want to change programmable name information, continue with
Assigning
or Changing Name Information
on page 5-7.
•
When you finish making changes, use the
Tilt
control to move the highlight bar
to
Exit
. Then press
Focus Far
to return to the
On-Screen Text Display
form.
Continue with step 9.
9.
Do one of the following:
•
If you want to change the display of status information, refer to
Displaying or
Hiding Status Information
on page 5-2.
•
If you want diagnostic information to appear when the dome resets, refer to
Displaying Diagnostic Tests During Reset
on page 5-6.
•
If you want to change the appearance of the text information, refer to
Changing
Text Display Attributes
on page 5-10.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near
or
Focus Far
to save your changes and exit the utility.
3
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to
Exit
, then press
Focus Far
. The
Dome Configuration Menu
appears. Continue with
What To Do Next
on page 5-12.
Displaying Diagnostic Tests During Reset
You can choose to have dome diagnostic tests run whenever the dome resets. The diagnostic
information displayed includes:
•
Communications Loopback Test
•
Camera Loopback Test
•
Motor Circuit Test.
If you do not want diagnostic information to appear when the dome resets, a screen
displaying the firmware version numbers for the Boot and Application code and the
maximum optical zoom for the dome appears.
3
This command is not supported with Manchester.
Summary of Contents for AD615
