17. Move the opposite press roller
4
to the desired
position.
18.
To check the setting,
drive for 30 m at working speed and then check
the work pattern.
6.3.11.9 Changing the furrow former
NOTE
The depth control wheel and cutting disc are
only partially shown for a better view. The depth
control wheel and the cutting disc do not need to
be removed to change the furrow former.
1.
Lift the implement.
2.
Secure the tractor and implement.
3.
Remove the bolt
1
.
4.
Remove the bolt and the bolt lock.
5.
Pull out the furrow former
2
downwards.
6.
To select the furrow former,
see "Determining the setting parameters".
7.
Install the desired furrow former.
8.
Install the bolt and bolt lock and tighten.
9.
To install the suitable catch roller for the furrow
former,
see "Changing the catch roller".
2
1
25 Nm
CMS-I-00002045
6.3.11.10 Adjusting the depth control wheel scraper
IMPORTANT
Damage to the depth control wheel due to
abrasion by the scraper
To check the distance,
rotate the depth control wheel
CMS-T-00003900-D.1
CMS-T-00001936-E.1
6 | Preparing the machine
Preparing the implement for operation
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
91
