6.
Remove the bolt
2
.
7.
Remove the fastener
.
8.
To relieve the residual pressure from the
hydraulic coulter pressure system,
open the valve
3
.
9.
To relieve the residual pressure from the
opposite hydraulic coulter pressure system,
repeat steps 6 to 8 on the opposite section.
ENVIRONMENTAL INFORMATION
Danger due to escaping oil
Collect any escaping oil.
Dispose of oil removal material in an
environmentally friendly manner.
10. Disconnect the connection
4
and store
connectors
5
in the threaded cartridge.
11. Remove the sealing caps
1
from the T-piece
2
.
12. Install the hydraulic hoses on the T-piece.
13.
To convert the hydraulic supply of the second
line
3
,
repeat steps 1 to 3.
5
1
4
2
3
CMS-I-00007201
For a conversion from 8 to 12 rows, the longer
hydraulic hoses between row 1 and 2 and between
row 11 and 12 are no longer needed.
14. Disconnect the connection
3
.
15. Remove the long hydraulic hose
1
.
16. Install the original hydraulic hose between the
coulters.
17.
To replace the second line
2
,
repeat steps 1 to 3.
1
3
2
CMS-I-00007202
6 | Preparing the machine
Preparing the implement for operation
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
109
