6.3.11.5 Adjusting the coulter pressure hydraulically
The coulter pressure is applied with a hydraulic
cylinder
1
.
CMS-I-00003953
The hydraulic coulter pressure system can be
equipped with contact force regulation. The force
sensors
1
determine the contact force of the
coulters. The signal processing
2
calculates an
average value for all coulters and regulates the
pressure in the hydraulic coulter pressure system.
CMS-I-00003921
1.
Switch on the fan.
If the hydraulic coulter pressure is set too high, the
implement will be lifted by the PreTeC coulters.
2.
To increase the coulter pressure specifically in
the tracks:
See section "Adjusting the coulter pressure in the
track".
NOTE
The working range is between 5 and 100 bar.
3.
To increase the coulter pressure for heavy soils
+
or to decrease it for light soils
-
,
refer to the ISOBUS operating manual "Adjusting
the coulter pressure".
4.
To check the setting,
drive for 30 m at working speed and "check the
seed placement depth".
1
+
-
CMS-I-00005409
CMS-T-00005524-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
86
