6.3.15 Adjusting the placement depth on the coupled fertiliser coulter
1.
Raise the implement.
2.
Secure the tractor and implement.
3.
Remove the linch pin
3
.
4.
Remove the pin
2
.
The notches
4
between 1 and 5 serve as
orientation.
5.
To adjust the fertiliser placement depth,
turn the setting shaft
1
to the desired position.
6.
Install the pin.
7.
Install the linch pin.
8.
Make the same adjustment for all fertiliser
coulters.
CMS-I-00003935
6.3.16 Adjusting the placement depth on the leaf spring-guided fertiliser coulter
NOTE
The operating conditions affect the correct setting.
The adjustment of the fertiliser coulter must be
adapted to the respective operating conditions.
Check the adjustment of the fertiliser coulter on
the field after driving a short distance.
The bolt
2
serves for orientation on the scale
1
.
CMS-I-00002042
CMS-T-00005574-B.1
CMS-T-00002061-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
101
