MD Series
5. Connection
5-2
(2) Connection between Master and Slave
Connect each device with the CONTROL connector and the CURR SIG
connector.
•
Connect each device with the CONTROL connector. There is no rule about
the order of connection and you can connect to either connector. Connect
them depending on arrangement of devices.
•
The position to connect the CURR SIG connector to the master is specified,
so be sure to connect to the specified connector. When it is connected to the
connector other than the specified, the welding is not performed correctly.
There is no rule about the order of connection in the specified connectors, so
connect them depending on arrangement of devices.
The position to connect the CURR SIG connector to the
master is specified (the connectors shown with diagonal
line).
There is no rule about the order of connection in the
specified connectors, so connect them depending on
arrangement of devices.
CONTROL connector
CURR SIG connector
There is no rule about the order of connecting the
CONTROL connectors, so connect them depending on
arrangement of devices.
CURR SENS connector (CURR SIG)
When connecting 1 master and 1 slave
Slave
Master
Master
Slave
Slave
Slave
Summary of Contents for MD Series
Page 111: ......