Amada IS-300CA, Operation Manual, Page: 47 / 208

CHAPTER 3: USING PROGRAMMING FUNCTIONS
IS-300CA INVERTER POWER SUPPLY
990-418 3-17
3. When
WELD2 STOP/WELD COUNT
is
WELD2 STOP and COUNTER is WORK:
WELD COUNTER
and
WORK COUNTER
are displayed. When the count reaches the set
WELD
count value,
WORK
count value is incremented by one.
This is different from
WELD COUNTER
described below.
4. When
WELD2 STOP/WELD COUNT
is
WELD COUNT:
WELD COUNTER
is displayed.
This is different from
WELD COUNTER
described above.
Monitored Value Notes:

Only the last monitored value and the number of counts of each
SCHEDULE
are kept for
a period of 10 days after the power is turned off.

When the repetition welding is performed with
PULSATION
or OFF time setting, only
the last data is displayed as the monitored value. The passing data is not displayed.

The monitor display is not automatically updated depending on the
MONITOR DISP
MODE
setting.