CHAPTER 3. USING DISPLAY SCREENS
CD-A DUAL PULSE RESISTANCE WELDING POWER SUPPLY
3-2
990-430
Editing the Run Screen
PULSE 1
To edit Pulse 1, pulse width, polarity and upslope
settings, press and hold the
PULSE 1
button for
about 1 second to highlight the values in
WHITE
as shown on the right.
Use the ▲▼
arrows,
PULSE WIDTH
and
POLARITY SELECT
buttons to change the values
for Pulse 1.
To change the energy value for Pulse 1, use the
▲▼arrows.
NOTE:
Pulse Polarity and Upslope are
not
user
settable in CD-A1000A.
PULSE 2
To edit the same values for Pulse 2, press the
PULSE 2
button and repeat the procedures for
Pulse 1.
SQUEEZE TIME
To edit the squeeze time, press the
SQZ/HOLD
button. U
se the ▲▼arrows
to change the time
setting.
