AMA KE 6002-2, Original Operating Manual

Page: 4 / 90

6.5.1 Coupling the 3-point mounting frame 45
6.5.2 Coupling the hydraulic hose lines 45
6.5.3 Coupling the power supply 47
6.5.4 Coupling the universal joint shaft 47
6.5.5 Calculating the permissible payload 48
6.6 Preparing the implement for
operation
48
6.6.1 Manual adjustment of the tine
working depth
48
6.6.2 Adjusting the working height of the
levelling board
50
6.6.3 Adjusting the working depth of the
side guide plates
51
6.6.4 Adjusting the spring tension of the
side guide plates
52
6.6.5 Adjusting the speed of the tines 53
6.6.6 Using the centre line eradicator 54
6.6.7 Adjusting the section end position 55
6.6.8 Adjusting the scraper to the roller 55
6.7 Preparing the machine for road
travel
56
6.7.1 Folding the implement 56
7 Using the machine 57
7.1 Unfolding the implement 57
7.2 Using the implement 57
7.3 Checking the set working depth 58
7.4 Turning on the headlands 58
8 Eliminating faults 59
9 Parking the machine 61
9.1 Unfolding the implement 61
9.2 Lowering the implement 61
9.3 Uncoupling the power supply 62
9.4 Disconnecting the hydraulic
hose lines
62
9.5 Uncoupling the universal joint
shaft
63
9.6 Uncoupling the 3-point mounting
frame
63
10 Repairing the machine 64
10.1 Maintaining the machine 64
10.1.1 Maintenance schedule 64
10.1.2 Checking the top link pin and lower
link pin
65
10.1.3 Checking the hydraulic hose lines 65
10.1.4 Checking the tines 66
10.1.5 Replacing the tines 67
10.1.6 Checking the oil level in the
interchangeable wheel gear
68
10.1.7 Checking the oil level in the centre
gearbox
69
10.1.8 Checking the oil level in the spur
gear trough
70
10.1.9 Replacing the oil in the
interchangeable wheel gear
71
10.1.10 Replacing the oil in the centre
gearbox
71
10.1.11 Ratchet clutch maintenance 73
10.1.12 Universal joint shaft maintenance 73
10.2 Lubricating the implement 74
10.2.1 Overview of lubrication points 75
10.3 Cleaning the implement 76
11 Loading the machine 77
11.1 Lifting the implement 77
11.2 Lashing the implement 78
12 Appendix 79
12.1 Bolt tightening torques 79
12.2 Other applicable documents 80
13 Directories 81
13.1 Glossary 81
13.2 Index 82
TABLE OF CONTENTS
MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE II