6.6.5 Adjusting the speed of the tines
1.
Depending on the desired tine speed
2
,
determine the desired gear ratio
1
.
1
2
CMS-I-00003483
2.
Park the soil tillage implement on a firm surface.
3.
To prevent oil from emerging out of the
interchangeable wheel gears,
slightly fold the soil tillage implement. Support
with suitable aids.
4.
Remove the peripheral cover screws
1
.
ENVIRONMENTAL INFORMATION
Danger
due to escaping oil
Collect any escaping oil.
Dispose of oil removal material in an
environmentally friendly manner.
5.
Remove the gearbox cover
2
.
1
2
CMS-I-00003397
6.
Remove both locking rings
2
.
7.
Remove the gear pair.
8.
Depending on the desired tine speed,
install the gear pair on the drive shaft
3
and the
output shaft
1
.
9.
Install the two locking rings.
10. Check the seating of the sealing ring on the
gearbox cover.
1
3
2
CMS-I-00003398
CMS-T-00010160-A.1
6 | Preparing the machine
Preparing the implement for operation
MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE
53
