11. Install the gearbox cover
2
with the sealing ring.
12. Install and tighten the peripheral cover screws
1
.
13. Set the same gear ratio for the opposite side of
the implement.
14.
After 15 minutes of operation,
check the gearbox for leaks.
1
2
24 Nm
CMS-I-00003480
6.6.6 Using the centre line eradicator
The centre line eradicator
1
levels the tillage horizon
between the implement sections. This prevents the
formation of a centre soil ridge.
CMS-I-00002944
REQUIREMENTS
The implement is not coupled
1.
Align the centre line eradicator
4
in the bracket
1
.
2.
Secure the centre line eradicator with the pin
2
.
3.
Secure the pin with a linch pin
3
.
CMS-I-00002977
CMS-T-00004047-B.1
6 | Preparing the machine
Preparing the implement for operation
MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE
54
