AMA KE 6002-2, Original Operating Manual

Page: 69 / 90

Every 50 operating hours / weekly
Checking the hydraulic hose lines see page 65
Checking the oil level in the interchangeable wheel
gear
see page 68
Checking the oil level in the centre gearbox see page 69
Checking the oil level in the spur gear trough see page 70
Every 50 operating hours / as required
Universal joint shaft maintenance see page 73
10.1.2 Checking the top link pin and lower link pin
INTERVAL
daily
1. Check the top link pins and lower link pins for
cracks or broken areas.
Permissible wear 2 mm
2. Replace the pins if there is significant wear.
10.1.3 Checking the hydraulic hose lines
INTERVAL
After initial operation
Every 50 operating hours
or
weekly
1. Check the hydraulic hose lines for damage, such
as chafing point, cuts, tears and deformation.
2. Check the hydraulic hose lines for leaks.
CMS-T-00002330-H.1
CMS-T-00002331-C.1
10 | Repairing the machine
Maintaining the machine
MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE 65