manualshive.com logo in svg

AMA KE 6002-2, Original Operating Manual

Share
Download
AMA KE 6002-2 Original Operating Manual Download Page 38

4.11.3 Additional license plate

1

Licence plate lighting

2

Licence plate holder

1

2

CMS-I-00003163

4.12 Rollers

4.12.1 AMAZONE rollers

Rollers are used to maintain the working depth, to
reconsolidate the soil, and to protect against the
rotating tools of the soil tillage implement.

NOTE

In combination with a seed drill, the soil tillage
implement may only be used with the rollers
specified in the seed drill operating manual.

Roller

Working width

Roller frame

6 m

Tooth packer roller

2x PW 3000-600

2-tube roller frame

Wedge ring roller

2x KW 3000-580

Wedge ring roller with matrix tyres

2x KWM 3000-600

Trapeze ring roller

2x TRW 3000-500

2x TRW 3000-600

4.12.2 Packer rollers from other manufacturers

The AMAZONE roller product range is supplemented
with rollers from third-party suppliers.

CMS-T-00003999-C.1

CMS-T-00010410-A.1

CMS-T-00010149-A.1

CMS-T-00010409-A.1

4 | Product description

Rollers 

MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE

34

Summary of Contents for KE 6002-2



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands