6.2 Attaching the backstop profiles for the lower links
The 3-point mounting frame is adjusted to the catch
hooks of the tractor using the spacer discs
2
.
NOTE
The ball sleeves
1
can only be used with Cat. 3
pins
3
.
CMS-I-00003055
Lower link catch hook
Spacer discs [mm]
Category 3
t=13.5
Category 4N
t=6.5
Top link catch hook
Spacer discs [mm]
Category 3
t=6.5
Category 4N
Without spacer disc
1.
Determine the spacer discs according to the
catch hooks on the tractor.
2.
Install the ball sleeves and spacer discs.
6.3 Preparing the universal joint shaft
1.
Have the length of the universal joint shaft
adjusted by a specialist workshop.
2.
Have the universal joint shaft installed by a
specialist workshop.
CMS-T-00004040-C.1
CMS-T-00005128-A.1
6 | Preparing the machine
Attaching the backstop profiles for the lower links
MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE
43
