manualshive.com logo in svg

AMA KE 6002-2, Original Operating Manual

Share
Download
AMA KE 6002-2 Original Operating Manual Download Page 11

Activity examples:

Driving the machine

Adjusting the working depth

2.1.1.2 Workplaces and passengers

Passengers

Passengers can fall, be run over and severely injured or killed due to machine movements. Ejected objects
can hit and injure passengers.

Do not let anybody ride on the machine.

Do not let anybody climb onto the driving machine.

2.1.1.3 Danger for children

Danger for children

Children cannot assess dangerous situations and can behave unpredictably. As a result, children are at a
higher risk.

Keep children away.

When you drive out or actuate machine movements,

make sure that there are no children in the danger area.

2.1.1.4 Operational safety

2.1.1.4.1 Perfect technical condition

Only use properly prepared machines

Without correct preparation according to this operating manual, operational safety of the machine is not
ensured. This can result in accidents and serious personal injury or even death.

Prepare the machine according to this operating manual.

CMS-T-00002307-B.1

CMS-T-00002308-A.1

CMS-T-00002309-C.1

CMS-T-00002314-C.1

2 | Safety and responsibility

Basic safety instructions 

MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE

7

Summary of Contents for KE 6002-2



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands