manualshive.com logo in svg

AMA KE 6002-2, Original Operating Manual

Share
Download
AMA KE 6002-2 Original Operating Manual Download Page 12

Danger due to damage to the machine

Damage to the machine can impede the operational safety of the machine and cause accidents. This can
result in serious injury or death.

If you suspect or observe damage,

secure the tractor and implement.

Immediately fix any damage that can affect safety.

Fix the damage according to this operating manual.

Any damage that you cannot fix yourself according to this operating manual must be fixed by a qualified
specialist workshop.

Observe the technical limit values

Non-observance of the technical limits values of the machine can result in accidents and serious personal
injury or even death. Moreover, the machine can be damaged. The technical limit values can be found in
the Technical Data.

Comply with the technical limit values.

2.1.1.4.2 Personal protective equipment

Personal protective equipment

Wearing personal protective equipment is an important safety element. Missing or unsuitable personal
protective equipment increases the risk of damage to health and personal injury. Personal protective
equipment includes: work gloves, safety shoes, protective clothing, breathing protection, hearing protection,
face protection, and eye protection

Determine the personal protective equipment required for each job and have it ready.

Use only protective equipment that is in proper condition and offers effective protection.

Adjust the personal protective equipment to the person, e.g. the size.

Observe the manufacturer's instructions regarding operating materials, seed, fertiliser, crop protection
products, and cleaning agents.

CMS-T-00002316-B.1

2 | Safety and responsibility

Basic safety instructions 

MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE

8

Summary of Contents for KE 6002-2



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands