6.6.2 Adjusting the working height of the levelling board
The levelling board
1
levels the flow of soil between
the tines and the roller. To crush large clods of soil
more effectively, the soil clods are held between the
tines by the levelling board. The levelling board can
deflect upwards thanks to the integrated overload
safety. The working height of the levelling board can
be adjusted.
CMS-I-00002945
1.
Insert the universal operating tool
1
in the
adjustment device
2
.
2.
To relieve the locking mechanism
4
,
swivel the adjustment device slightly upwards.
3.
Release the locking mechanism. Hold the
universal operating tool in position.
Work application
Working height
After the plough
Reduce
-
The levelling board is
pushing up a small ridge
of soil.
For mulch seeding
Increase
+
So that crop residues
can pass under the
levelling board.
4.
Move the levelling board
3
to the desired
position.
The locking mechanism must engage.
5.
Make the same setting for the opposite side of the
implement.
6.
To check the setting,
drive for 30 m at working speed and then check
the work pattern.
1
2
4
3
+
-
CMS-I-00003454
CMS-T-00004620-C.1
6 | Preparing the machine
Preparing the implement for operation
MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE
50
