11. Make the same setting for the opposite side of the
implement.
12.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
6.6.4 Adjusting the spring tension of the side guide plates
The swivelling side panel deflects upwards on
obstacles. The dead weight of the side panel and a
tension spring bring the side panel back into working
position. The pre-tensioning of the tension spring is
adjustable.
The tension of the spring for the side guide plates
1
has been adjusted at the factory for light and medium
soils.
Work application
Spring tension
After the plough,
heavy soils
Increase
+
After the plough,
light soils
Reduce
-
For mulch seeding
with coarse organic
residues
Reduce
-
To allow crop residues to pass
underneath the side guide
plates.
NOTE
The adjustment of the working depth must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1.
To move the spring tension
3
to the desired
position,
adjust the preload with the nut
2
.
2.
Make the same setting for the opposite side of the
implement.
3.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
+
-
2
3
1
CMS-I-00003451
CMS-T-00010047-A.1
6 | Preparing the machine
Preparing the implement for operation
MG7512-EN-GB | C.1 | 29.09.2022 | © AMAZONE
52
