Altronic VariSpark CPU-XL, Operating Instructions Manual

Page: 26 / 97

CPU-XL VariSpark IOM 07-21
All rights reserved © ALTRONIC, LLC 2021
26
24.8 The COMMUNICATION SETUP MENU allows the adjustment of various aspects
of the Logic/Display Module’s two user ports.
AT
PRESS TO PRESS TO PRESS TO
ACCESS GO TO THE EXIT
THE MENU NEXT MENU
ENTER
ESC
AT
PRESS TO
MODIFY
THE VALUE
PRESS TO PRESS TO PRESS TO
ADVANCE TO GO TO THE EXIT
THE NEXT NEXT MENU
SELECTION
Node ID can be set anywhere from 1 to 254. The auxiliary RS-485 (Modbus RTU)
port can have the following baud rates 9600, 19200, 38400, 57600, 115200.
Always no parity, 8 data bits, and 1 stop bit (N81). The USB port has the following
modes: TERMINAL , MODBUS RTU , and DEBUG . The TERMINAL mode is for
future use only. The MODBUS RTU mode follows the node ID, and the USB baud
rate. This mode uses the virtual com port driver that is a part of the USB driver on
the CDROM. The USB port virtual com port baud rate can be set to the following:
9600, 19200, 38400, 57600, 115200. The DEBUG mode is used by the factory for
testing purposes.
24.9 The CLOCK SETUP menu is used to set the desired calendar date and time used
by the datalog feature of the Logic/Display Module.
AT
NEXT
⬆ ⬇
ENTER
NEXT ESC