Altronic VariSpark CPU-XL, Operating Instructions Manual, Page: 50 / 97

CPU-XL VariSpark IOM 07-21
All rights reserved © ALTRONIC, LLC 2021
50
29.6: The long-term graph shows the RPM range observed over a datalog interval.
PRESS TO VIEW THE PRESS TO
SHORT TERM RPM GRAPH ADJUST THE
DISPLAY
PARAMETERS
⬆
⬇
PRESS TO CHANGE THE PRESS TO EXIT
LAYOUT OF THE GRAPH
ENTER ESC
This screen shows the current running RPM as reported by the ignition system.
It also shows the log range being shown. The up and down arrows to the right of
“LOGS” indicates whether or not there are more valid logs before (up) or after
(down) the current range.
Pressing ENTER will toggle the arrows in the upper left-hand corner of the
graph and change the role of the up and down arrow keys.
n
When the arrows are (left/right), using the ↓ ↑ (up/down) arrow keys will
shift the time period being displayed (to view data earlier/later than what is
currently being graphed).
n
When the arrows are
~
(left and right) using the ↓ ↑ ( up/down) arrow keys
will adjust the scale of the graph in the X direction (Time). This will cause
the graph to change the length of time displayed (To - From increases).
n
When the arrows are
é
(up/down), using the ↓ ↑ ( up/down) arrow keys will
adjust the center of the graph in the Y direction (RPM). This change is
stored in EEPROM memory.
n
When the arrows are
üÇ
(up and down), using the ↓ ↑ ( up/down) arrow keys
will adjust the scale of the graph in the Y direction (RPM). This change is
stored in EEPROM memory.
AUTO