MN-36580 (Rev. 2) 01/16 • Quickchillers • 5
InstallatIon requIreMents
The model QC2-3 is a counter mounted unit and
must use legs that allow for a 4" (102mm)
clearance between the cabinet and the counter.
For all other
models, install
the appliance
on a smooth
and level floor surface. Use the
adjustable cabinet legs to level the Quickchiller.
Adjust from front-to-back and from side-to-side
with the use of a spirit level to evenly distribute
the cabinet weight and avoid pulling the cabinet
alignment out of square.
After leveling the cabinet, check that the door
handle is aligned properly. Also check the height
relationship of the optional roll-in cart to the
cabinet. Adjust the Quickchiller height as needed
to accommodate the cart and to securely close the
Quickchiller door.
Door seal:
Check the door gasket to make certain it is sealing
properly and that the gasket provides an even and
positive seal around the entire door frame.
refrIgeratIon (qc2-100r)
Alto-Shaam does not offer recommendations on
maximum run sizes. Best refrigeration piping
practices should always be followed and piping
for any longer runs is the responsibility of
the installer.
guIDe InstallatIon for
trolley optIon on qc2-100
trolley guide Installation
1.
Align each guide rail with the holes located
under the cabinet.
(A)
2. Fasten each guide rail with washer, lock washer
and bolt.
3. Push the roll-in cart (trolley) into the
Quickchiller and close the door.
4. At the front of the Quickchiller, make certain
contact has been made between the Quickchiller
and the cart along the total width of the door
to create a complete seal. When a full seal has
been determined, recheck each connection to
make certain it has been fully tightened.
W a r n I n g
Appliance and accessories may be
heavy. To prevent serious injury,
ALWAYS use a sufficient number
of trained and experienced workers
when moving or leveling appliance
and handling accessories.
I n s t a l l a t I o n
s I t e I n s t a l l a t I o n
A
Trolley Guide Installation
