Altigen AltiWare ACM 5.2 Administration Manual Download Page 360

Page: 360 / 436

Chapter 27: Microsoft Exchange Integration

348

AltiWare ACM 5.2 Administration Manual

box, the Domain name is displayed on the

Computer Name

tab.

The Domain names need to be the same on the two systems.

5. To verify AltiGen Services:

a. On the system running AltiWare, go to

Services

•

In Windows XP, select

Start > Control Panel > Administrative Tools >

Services

•

In Windows 2003, select

Start > Administrative Tools > Services

A Windows Services window opens, as in this example.

Figure 1. Windows Services window

b. Select

AltiGen Exchange Integration Service COM Server

, right-click and

select

Properties

A Service startup options dialog box opens:

Summary of Contents for AltiWare ACM 5.2





















































































































































































































































































































































































































































Search results

Summary of Contents for AltiWare ACM 5.2

Reviews:

Related manuals for AltiWare ACM 5.2

Brands by name

Popular brands

Altigen AltiWare ACM 5.2, Administration Manual

Search results

Summary of Contents for AltiWare ACM 5.2

Reviews:

Related manuals for AltiWare ACM 5.2

Brands by name

Popular brands