Altigen AltiWare ACM 5.2, Administration Manual

Page: 36 / 436

Chapter 2: AltiWare Requirements
24
AltiWare ACM 5.2 Administration Manual
Installing AltiWare Admin on a Network Client
AltiWare Administrator can be installed to a network client, providing the ability to
manage the AltiWare system remotely. If there is no firewall on the LAN where AltiWare
resides, AltiWare Administrator can be installed and used to manage AltiWare over the
Internet from a remote site as well.
When you install AltiWare Administrator on a machine that is not an AltiWare server, it
does not contain the switching, SMTP/POP3 server, messaging agent, AltiBackup,
Exchange integration services that are included in the full AltiWare installation described
above. Remote AltiWare Administrator does
not utilize the System Data Management or
Shutdown Switching Service functions on the AltiWare system.
To install AltiWare Administrator on a non-AltiServ PC for the first time:
1. Insert the AltiWare CD-ROM into the appropriate drive.
2. Run
SETUP.EXE from the ACC Administrator or ACM Administrator folder.
3. Follow the instructions on the screen.
Uninstalling AltiWare
To back out of the upgrade, be sure to stop all AltiWare-related services before
uninstallation. To do this, run AltiWare Administrator, log in, and select
Services >
Shutdown Switching from the menu.
In the event that the auxiliary services were not stopped, stop them one at a time in
Windows, using the
Start > Programs > Administrative Tools > Services applet.
Then go to Start > Programs > Control Panel > Add/Remove Programs , and select
AltiWare ACM 5.2 , and click Remove .
Troubleshooting (Error Messages)
Use this table for troubleshooting error messages encountered during software
installation.
Error Message Solution
This version of AltiWare does not
support Triton T1 Rev A2 or VoIP Rev
A2 boards. Please unplug these
boards, then run setup again. Unplug Triton T1 Rev A2 or VoIP Rev
A2 boards, then run setup again.
Copy activation file failed. Activation file (exctl) is not in the
specified folder, is missing, or is
corrupted. Make sure you select the
correct file folder where the activation
file is located and try again. If problem
persists, you can manually copy the
activation file to c:\AltiServ\db
directory (if AltiServ is installed on the
c: drive) and run the installation
program again.