Altec AIR P210WLP-V, User Manual

Page: 74 / 96

Altec AIR, LLC P210WLP Series Air Dryer User’s Guide
Page 74 of 96 P017455 – Rev. N
10.2 Six Month Maintenance
MODEL: LOCATION NAME:
SERIAL NUMBER: ADDRESS:
DATE INSTALLED:
Maintenance Interval (Months)
Procedure Section 6 12 18 24 30
Measure & Record
Compressor Amp Draw
9.2
Measure & Record Incoming Voltage
(must be 110 - 125 VAC for P210WLP models and
must be 208 - 253 VAC for P212WLP models)
9.4
Test High & Low Outlet Pressure Alarms 9.11 &
9.12
    
Set System Pressure (50 PSI) 8.8
    
Set Outlet Pressure 8.10
    
Test Consistent Heatless Dryer Cycling 9.5
    
Test Fan 9.7
    
Test Compressor ON/OFF Cycling 9.8
    
Test High Compressor Last Run Time Alarm 9.9
    
Test Humidity Alarm & System Shutdown 9.10
    
Test Air Fittings for Leaks 9.13
    
Visually Inspect Inside & Outside of Unit for Loose
Wiring or Hardware
    
Maintenance Performed by:
Date of Maintenance:
NOTE: COPY OR PRINT THIS PAGE AND KEEP IT WITH THE AIR DRYER