Altec AIR, LLC
P210WLP Series Air Dryer User’s Guide
Page 39 of 96
P017455 – Rev. N
8.7.6.6
Press the Right (
) & Left (
) Arrow Buttons to toggle between
YES / NO. If YES is selected the unit will be reset to factory default
values. If NO is selected the unit will not be reset to factory values, and
all previous setpoints will be retained
8.7.6.7
Press the Left (
) Arrow Button to escape to the system setup menu
screen
8.7.7
Set Current Time –
8.7.7.1
From the system setup
menu screen, press the
Up (
) & Down (
)
Arrow Buttons to
navigate between the system setup options to locate “SET CURRENT
TIME”
8.7.7.2
Press the Enter (●) button to enter the change value screen
8.7.7.3
Press the Right (
) & Left (
) Arrow Buttons to move the
underscore beneath the digit to change
8.7.7.4
Press the Up (
) & Down (
) Arrow Buttons to change the value of
the selected digit. Press the Right (
) & Left (
) Arrow Buttons to
navigate to additional digits to change
8.7.7.5
Press the Enter (●) button when the value is as desired
8.7.7.6
Press the Right (
) & Left (
) Arrow Buttons to toggle between
YES / NO. If YES is selected the unit will be reset to factory default
values. If NO is selected the unit will not be reset to factory values, and
all previous setpoints will be retained
8.7.7.7
Press the Left (
) Arrow Button to escape to the system setup menu
screen
8.7.8
Firmware Update
8.7.8.1
To update firmware using the LCD interface you will need a USB
stick with less than 16GB of storage.
