Altec AIR, LLC
P210WLP Series Air Dryer User’s Guide
Page 28 of 96
P017455 – Rev. N
8.2 Connecting Air Supply Lines to the Dryer
8.2.1
Connect a 3/8” air supply
line to the Outlet Port.
NOTE:
For all dryers with
minimal flow, install the
Precision Bleed Orifice fitting
to maintain a constant flow of
air.
WARNING!
Internal surfaces may be hot
. Use care when coming into contact
with internal components as there is a potential for some of these
components to become hot when in operation or standby.
IMPORTANT!
Performing procedures not described in this User’s Guide or
installing components not supplied by Altec AIR is NOT
RECOMMENDED AND MAY VOID THE WARRANTY.
WARNING!
High Noise
. ALTEC AIR air-dryers are meant to be installed in an
unattended area.
CAUTION!
Observe precautions for handling
Electrostatic Sensitive Devices.
