Altec AIR, LLC
P210WLP Series Air Dryer User’s Guide
Page 7 of 96
P017455 – Rev. N
WARNING!
Internal surfaces may be hot
. Use care when coming into contact
with internal components as there is a potential for some of these
components to become hot when in operation or standby.
CAUTION!
Depressurizing the Air Dryer may be necessary before performing
certain procedures.
NEVER
remove pressure sensing tubes from the
Control Board without depressurizing the Air Dryer first, or
damage to
the Control Board will occur.
CAUTION!
Incoming power to Dryer must be:
15 amp service recommended
110 - 125 VAC, 50/60 Hz for P210WLP models
208 - 253 VAC, 50/60 Hz,
1 Phase
for P212WLP models
CAUTION!
Proper installation & maintenance as outlined in this User’s Guide is
extremely important to ensure the reliability and longevity of the
equipment as well as prevent damage or personal injury.
WARNING!
High Noise
. PUREGAS air-dryers are meant to be installed in an
unattended area.
