35
-EN
→
→
→
→
6
Press the rotary encoder and select the channel
that you wish to adjust.
Each press changes the channel as follows.
When only one 2-way divider is connected:
→
Low
→
F-High
→
R-High
When two 2-way dividers are connected:
→
Low
→
High
Each time the
6
(F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→
Low
→
High
When only one 3-way divider is connected:
→
Low
→
Mid-L
→
Mid-H
→
High
When two 3-way dividers are connected:
→
Low
→
Mid-L
→
Mid-H
→
High
Each time the
6
(F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment, and the
display also changes.
→
Low
→
Mid-L
→
Mid-H
→
High
7
Rotate the rotary encoder clockwise or
counterclockwise to adjust the Cross-Over point
upward or downward to your desired point.
8
When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the Divider mode screen.
→
→
Adjusting Levels
1
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
2
Press the
2
(LEVEL) button. The mode changes
to the Level Adjustment mode.
3
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way system divider is
connected:
→
L-Low
→
R-Low
→
F-High/L
R-High/R
←
R-High/L
←
F-High/R
←
When two 2-way system dividers are
connected:
→
L-Low
→
R-Low
→
L-High
→
R-High
Each time the
6
(F/R) button is pressed,
the mode switches between the Front
adjustment, and Rear adjustment modes,
and the display also changes.
→
L-Low
→
R-Low
→
L-High
→
R-High
When only one 3-way divider is connected:
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
When two 3-way dividers are connected:
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
Each time the
6
(F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
4
Rotate the rotary encoder clockwise or
counterclockwise to adjust to your desired level
upward or downward respectively.
5
When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode.
→
→
Summary of Contents for CVA-1006R
Page 70: ...68 EN ...
