36
-EN
→
→
→
→
Audio Processor Operation (Optional)
Adjusting Time-Correction for
2-Way Speaker System
Use this procedure to adjust the sound time
difference between the speakers.
1
Press and hold the FUNC (RETURN) button for
at least 2 seconds in the Divider mode.
The mode changes to the Divider Adjustment
mode.
2
Press the
3
(T-CORR.) button.
The mode changes to the Time Correction
Adjustment mode.
3
Press the rotary encoder and select the channel
you wish to adjust.
Each press changes the channels as follows:
When only one 2-way divider is connected:
→
L-Low
→
R-Low
→
F-High/L
R-High/R
←
R-High/L
←
F-High/R
←
When two 2-way dividers are connected:
→
L-Low
→
R-Low
→
L-High
→
R-High
Each time the
6
(F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→
L-Low
→
R-Low
→
L-High
→
R-High
When only one 3-way divider is connected:
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
When two 3-way dividers are connected:
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
Each time the
6
(F/R) button is pressed,
the mode switches between the Front
adjustment and Rear adjustment modes,
and the display also changes.
→
L-Low
→
R-Low
→
L-Mid
→
R-Mid
→
L-High
→
R-High
4
Rotate the rotary encoder clockwise or
counterclockwise to adjust the time correction
value upward or downward respectively.
5
When adjustments have been completed, press
the FUNC (RETURN) button.
The display returns to the Divider mode screen.
(IVX-C806)
SOURCE
SOURCE Rotary encoder
Rotary encoder
FUNC
FUNC
6
6
4
4
3
3
Function buttons
(
1
through
6
)
Function buttons
(
1
through
6
)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
Summary of Contents for CVA-1006R
Page 70: ...68 EN ...
