63
-EN
Parking Brake Lead Connection
If necessary, use a pinch connector to connect the parking brake lead, etc.
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
NOTE
If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately).
If the switched power (ignition) lead of the IVX-C806/IVX-M706/CVA-1006R is connected directly to the positive (+) post of
the vehicle‘s battery, the IVX-C806/IVX-M706/CVA-1006R draws some current (several hundred milliamperes) even when
its switch is placed in the OFF position and the battery may be discharged.
1
Vehicle Cable
Stopper
Monitor Cable
Pinch Connector
2
Pliers
Battery
(Red)
SPST SW (Optional)
(Yellow)
IVX-C806/IVX-
M706/CVA-1006R
(Monitor and Tuner)
Cautions for handling the I/F cord
The I/F cord is used to connect the monitor and the tuner BOX.
Press the LOCK button gently while removing the I/F cord out of the terminal. (See the illustration below.)
If you pull out the lock by force, the lock pins will be forced. This will cause a bad connection.
Some possible problems:
• The power of the unit turns off frequently.
• The display disappears.
• The monitor doesn’t open or close.
Pull out the cord before you unlock the pins.
LOCK button
ACC
BATTERY
Summary of Contents for CVA-1006R
Page 70: ...68 EN ...
