49
-EN
Setting Automatic Opening/
Closing of Monitor
When the Automatic Opening/Closing mode is
"ON," the monitor automatically opens when the
ignition key is turned to the "ACC" or "ON"
position. The monitor automatically closes when
the ignition key is turned OFF.
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
1
Press the SOURCE button.
The main menu appears on the display.
2
Press the
6
(SETUP) button.
The Setup mode screen appears.
3
Rotate the rotary encoder and select "AUTO
OPEN."
The display shows the Function Guide.
4
Press the
2
(ON) button to set the Auto
Opening mode ON.
To set the Auto Opening mode OFF, press the
1
(OFF) button. If set to the "OFF" position, the
monitor should be manually opened or closed by
pressing the OPEN/CLOSE button.
5
Press the FUNC (RETURN) button, the display
returns to the main menu screen.
Adjusting Brightness of Picture
Immediately after inputting titles or changing the
settings of Setup Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
NOTE
The Parking Brake must be engaged to access the
display mode screen. Attempting to access this screen
while driving will display the warning-CAN’T
OPERATE WHILE DRIVING.
1
Press the SOURCE button.
The main menu appears on the display.
2
Press the
5
(DISPLAY) button.
The Display mode screen appears.
3
Rotate the rotary encoder and select "BRIGHT"
to activate the Brightness Adjustment mode.
The display shows the Function Guide.
4
Press the
1
(
;
DARK) to make the picture
darker or press the
3
(LIGHT
:
) to make the
picture brighter. You can adjust the brightness
between MIN (–15) and MAX (+15). When it
reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively. To
quickly set to the centre position, press the
2
(±0) button.
5
When the adjustment has been completed, press
the FUNC (RETURN) button. The display returns
to the main menu screen.
NOTE
With the Display mode screen displayed, pressing and
rotating the rotary encoder can adjust the volume level.
Summary of Contents for CVA-1006R
Page 70: ...68 EN ...
