Alpine CVA-1006R, Owner'S Manual

Page: 19 / 70

17
-EN
Priority PTY (Programme Type)
This function allows presetting of a programme
type such as music category, news, etc. You can
listen to a programme in the preset programme
type as the unit automatically gives priority to the
preset programme type when it begins
broadcasting, and interrupts the programme you
are currently listening. This feature is functional
when your unit is set to a mode other than the LW
and MW modes.
1
Press the RDS button.
The display changes to the RDS Setting Screen.
2
Press the
6
(P.PTY) button to activate the
PRIORITY PTY mode.
The programme type selected by the P.PTY is
displayed for 5 seconds.
NOTE
If no button is pressed within 5 seconds after pressing the
6
(P.PTY) button, the PRIORITY PTY mode is
automatically cancelled.
3
Press the
1
(
;
BACK) or
2
(NEXT
:
) button
within 5 seconds to choose a desired
programme type. Then press
6
(P.PTY) button.
The PRIORITY PTY function will activate.
The "P.PTY" indicator lights up.
NOTE
When the P.PTY mode is set to the ON position, the unit
automatically plays the preset programme type whenever
the unit receives the programme type even while the unit
is displaying other source screen than radio.
If you do not want to listen to the programme being
received, press the
6
(P.PTY) button to skip the P.PTY
mode. The P.PTY mode will remain in the P.PTY ON
position to receive the next preset programme type when
it occurs.
4
Press and hold the
6
(P.PTY) button for at least
2 seconds to turn on the Priority PTY
(interrupting) mode.
•
To disable the PRIORITY PTY (interrupting)
function, press and hold the
6
(P.PTY) button
for more than 2 seconds.
NOTE
In the PRIORITY PTY function, unlike in the T.INFO
function, the volume does not increase during operation.
5
Press the FUNC (RETURN) button to return to
the previous screen.
Turning Emergency Alarm Display
On or Off
1
Press the SOURCE button.
The display shows the main menu screen.
2
Press the
6
(SETUP) button.
The Setup mode screen appears in the display.
3
Rotate the rotary encoder and select "PTY31."
The Function Guide menu is displayed.
4
Press the
1
(OFF) or
2
(ON) button to select
the PTY31 Off or On mode.
In the PTY31 On mode, the unit will show
"ALARM" in the display when the unit receives
the PTY31 (Emergency Broadcast) signal.
NOTE
If emergency broadcast is received, the unit changes to
the radio mode even while you are playing a source other
than radio.
5
When your selection has been made, press the
FUNC (RETURN) button to return to the main
menu screen.
Displaying Radio Text
Text messages from a radio station can be
displayed.
1
Tune in a radio station that transmits text
messages.
2
Press and hold the R.TEXT button for at least 2
seconds in the FM radio mode to activate the
Radio Text mode.
The display shows "R/T WAIT" for a few
seconds.
3
To deactivate the Radio Text mode, press and
hold the R.TEXT button for at least 2 seconds.
NOTE
If there is no receivable text message or the unit cannot
receive a text message properly, the display shows "NO
TEXT."