Alpine CVA-1006R Page 60 Owner'S Manual Download

Page: 60 / 70

-EN

Information

Indication for MD Player (IVX-M706 only)

• No MD is inserted.

- Insert an MD.

• No recording on disc (blank disc).

- Load disc after recording.

• Dirty or scratched MD, bad recording, a non recorded

MD, not a music MD.
- Press the MD

button and change the MD.

• The MD is inserted incorrectly.

- Press the MD

button and insert the MD correctly.

• Dew condensation.

- Wait a while.

• Mechanism error.

1. Press the MD

button and eject the MD.

If not ejecting, consult your Alpine dealer.

2. When the error indication remains after ejecting, press the

button again.

If the error indication still does not turn off after pressing
the MD

button for a few times, consult your Alpine

dealer.

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

NO DISC

ERROR

HI-TEMP

Indication for CD Changer (Optional)

• Temperature in the vehicle is too high.

- Allow the vehicle's interior temperature to cool.

The indicator will disappear when the temperature
returns to within operation range.

• No CD magazine is loaded into the CD Changer.

- Insert a magazine.

• Malfunction in the CD Changer.

- Consult your Alpine dealer.

Press the magazine eject button and pull out the
magazine. Check the indication and insert the
magazine again. If the magazine cannot be pulled out,
consult your Alpine dealer.

• Magazine ejection not possible.

- Press the magazine eject button.

If the magazine does not eject, see the Owner's
Manual for the CD Changer.

• A disc is left inside the CD Changer.

- Press the EJECT button to activate the eject function.

When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer to
receive the disc left inside the CD Changer.

HI-TEMP

NO MAGAZINE

ERROR-01

ERROR-02

Summary of Contents for CVA-1006R







































































Search results

Summary of Contents for CVA-1006R

Reviews:

Related manuals for CVA-1006R

Brands by name

Popular brands

Alpine CVA-1006R, Owner'S Manual

Search results

Summary of Contents for CVA-1006R

Reviews:

Related manuals for CVA-1006R

Brands by name

Popular brands