Alpine CVA-1006R, Owner'S Manual

Page: 14 / 70

12
-EN
Radio Operation
1 6
FUNC
BAND
1
FUNC
6 3 4 3 4
BAND
Function buttons
(
1
through
6
)
Function buttons
(
1
through
6
)
Mono/Stereo Switching
Use the Mono (monaural) mode to reduce the
noise level of noisy stereo broadcast due to weak
signal.
1
Press the
4
(MONO) button in the radio mode.
"STEREO" indicator disappears and the
monaural mode activates.
2
To return to the stereo mode, press the
4
(MONO) button again.
NOTE
"STEREO" indicator appears when a stereo station is
tuned in.
Manual Storing of Station Presets
1
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
2
Press and hold any one of the Function buttons
1
(P.SET1) through
6
(P.SET6) for at least 2
seconds. The Function Guide indicators in the
display, P.SET1 through P.SET6, will blink for 5
seconds.
3
While the P.SET1 through P.SET6 indicators in
the display are blinking, press the Function
button into which you wish to store the station
(within 5 seconds). The indicators in the display
stop blinking, showing that the station has been
memorized at the Preset button pressed.
4
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW or LW).
NOTE
If a preset memory has already been set in the same
Function button, it will be cleared and the new station
will be memorized.
5 5
(IVX-C806)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)