6
HM 6Split
HM 12Split
2 Delivery and handling
Transport
Available models
Compatibility
Assembly
The HM 6Split / HM 12Split unit can be used with
Split type outdoor units. The compatible Alpha Inno-
tec SPLIT heat pumps are:
Outdoor unit
Compatibility
L 6Split
HM 6Split
L 8Split
HM 12Split
L 12Split
Section 2 |
Delivery and handling
CAUTION
When the SHB 10 is stored or transported horizontally
with the display facing up, no devices / components
may be stored on top of the unit. It may damage the
device.
Units include the following separate models:
• HM 6Split - unit dedicated for use with L 6Split.
• HM 12Split - unit dedicated for use with L 8Split
and L 12Split.
1. Place the included mounting hanger horizontally
against the wall. Level the hanger using the spirit
level. Mark the points for the mounting holes to
be drilled.
2. Drill the holes in marked points.
3. Screw the attachments to the wall using raw-
plugs and bolts.
4. Install HM 6Split / HM 12Split on the mounted
hanger.
5. Level the device using the bottom adjustment
screws.
The HM 6Split / HM 12Split indoor unit should be
transported and stored vertically or horizontally on
the rear wall with the display facing up.
HM 6Split / HM 12Split can be transported into the
building vertically or carefully placed on the rear wall
with the display facing up.
• HM 6Split / HM 12Split is equipped with
wall-mounted hanger. For mounting hole spac-
ing, see drawing below.
• HM 6Split / HM 12Split must be hanged on walls
of sufficient load-bearing capacity able to take
the weight of a filled indoor unit.
• Since HM 6Split / HM 12Split is equipped with
condensate drain-off system, the indoor unit must
be installed at the site with sewage system drain.
CAUTION
The HM 6Split / HM 12Split unit must be hanged on
the wall using the included hanger. The device can be
installed in vertical position only.
130mm
130mm
CAUTION
Rawplugs should be assessed in terms of load-bearing
capacity and material of the wall on which the device
is to be hanged.
More information on Alpha Innotec SPLIT heat pumps
available at https://www.alpha-innotec.com/ and in
dedicated installation and user manuals.
See section "Accessories" for the list of accessories
to be used with HM 6Split / HM 12Split.
