![background image](http://html1.mh-extra.com/html/alpha-innotec/hm-12split/hm-12split_installation-and-operating-manual_2906141063.webp)
63
HM 6Split
HM 12Split
Section 10 |
Service
Menu 7.2 - logging
Select “choose another file" if you do not want to use
the suggested software. When you scroll through the
files, information about the marked software is shown
in a fact box just as before. When you have selected a
file with the OK button you will return to the previous
page (menu 7.1) where you can choose to start the
update.
Here you can manage (save as or retrieve from) all
the menu settings (user and service menus) in the
controller with a USB memory.
Via "save settings" you save the menu settings to the
USB memory in order to restore them later or to copy
the settings to another controller.
Via "recover settings" you reset all menu settings from
the USB memory.
Here you can choose how current measurement val-
ues from the controller should be saved onto a log file
on the USB memory.
1. Set the desired interval between loggings.
2. Tick “activated".
3. The present values from the controller are saved
in a file in the USB memory at the set interval
until “activated" is unticked.
IMPORTANT
When you save the menu settings to the USB memory
you replace any previously saved settings on the USB
memory.
IMPORTANT
Reset of the menu settings from the USB memory
cannot be undone.
IMPORTANT
Untick "activated" before removing the USB
memory.
Choose another file
Menu 7.3 - manage settings
Setting range: 1 s – 60 min
Factory setting range: 5 s