![background image](http://html1.mh-extra.com/html/alpha-innotec/hm-12split/hm-12split_installation-and-operating-manual_2906141038.webp)
38
HM 6Split
HM 12Split
Różne klawiatury
Różne klawiatury
Values to be changed
Operation
Use the virtual keyboard
Scroll through the windows
Help menu
Scroll through the windows in the start guide
Selecting menu
Selecting options
Setting a value
In many menus there is a symbol that indicates
that extra help is available
To access the help text:
1. Use the control knob to select the help symbol.
2. Press the OK button.
The help text often consists of several windows that
you can scroll between using the control knob.
To move the check mark, turn the control knob to the
left or the right. The marked position is white and/or
has a turned up tab.
In some menus where text may require entering, a
virtual keyboard is available.
A menu can consist of several windows. Turn the
control knob to scroll between the windows.
Depending on the menu, you can gain access to dif-
ferent character sets which you can select using the
control knob. To change character table, press the
Back button. If a menu only has one character set the
keyboard is displayed directly.
When you have finished writing, mark "OK" and press
the OK button.
1. Turn the control knob until one of the arrows in
the top left corner (at the page number) has been
marked.
2. Press the OK button to skip between the steps
in the start guide.
To advance in the menu system select a main menu
by marking it and then pressing the OK button. A new
window then opens with sub menus.
Select one of the sub menus by marking it and then
pressing the OK button.
To set a value:
1. Mark the value you want to set using the
control knob.
2. Press the OK button. The background of
the value becomes green, which means
that you have accessed the setting mode.
3. Turn the control knob to the right to in-
crease the value and to the left to reduce
the value.
4. Press the OK button to confirm the value
you have set. To change and return to the
original value, press the Back button.
In an options menu the current selected op-
tion is indicated by a green tick.
To select another option:
1. Mark the applicable option. One of the
options is pre-selected (white).
2. Press the OK button to confirm the se-
lected option. The selected option has a
green tick.
Current menu window
Arrows to scroll through window in start guide
Number of windows in the menu
Different keyboards
Control - Introduction
Section 8 |